Toolstoday

Cutting leather on the CNC machine using the Donek D4 Drag knife on the Stepcraft Gen 3 D.840 CNC machine, all available on our website!  The drag knife cut the leather perfectly leaving nice clean cuts, I love watching it work! Drag Knife Cuts Spindle Off Feed Rate: 60ipm Plunge Rate: 30ipm Ramp/Lead in: .75

Cutting porous cloth on the CNC machine using the Donek D4 Drag knife to see if we can make it work. The paper trick was an excellent suggestion and worked great, I'll have to try this again sometime with a larger piece of leather to get a better hold! The tools used in this video are available from @toolstoday, be sure to check them out on our website! ------ Stepcraft M.1400 CNC machine, item no. stepcraft_M1400 Donek D4 Drag Knife, item no. D4 Black Box Storm Vacuum, item no. BBV-SVP-2 Vectric V-Carve Pro Software, item no. AVC308-2 ------ Drag Knife Cuts Spindle Off Feed Rate: 60ipm Plunge Rate: 30ipm Ramp/Lead in: .75

Cutting, prepping and trimming a dyed maple burl pen blank to turn for a gift. The carbide inserts on this Woodpeckers Ci Pen Mill kit cut this burl extremely cleanly trimming the wood back to the brass tube with absolutely no tear out! The tools used in this video are available on our website, be sure to check them out there! -- Woodpeckers Ultra-Shear Pen Mill Ci 13-piece set, item no. WP-PMCIDLX Wera Hex-Plus Metric L-Keys, item no. 05073593001 Rikon 1.75hp Bandsaw, item no. 10-326 Pica 3030 Pencil, item no. PC-3030/SB Starbond Thick CA Glue, item no. 20002 Starbond Accelerator, item no. A6

Engraving our logo into the shop utility cart project using the xTool F1 laser now available from @toolstoday. The laser did a great job giving a nice contrast to the engraved area and the slight overburn was cleaned up super quick with some 220 grit paper! Be sure to check it and the other tools used out on our website, all items are listed below. -- xTool F1 Laser, item no. XT-P5010200 xTool Desktop Smoke Purifier, item no. XT-P5010215 xTool Button Switch, item no. XT-P5010364 Festool ETSC 125 cordless sander, item no. FS-576822

What do you think of how this Spektra™ logo turned out? Pouring the white and blue epoxy into the Spektra™ logo cut out with the Shaper Origin, item no. SO1-NN, all available on our website. ---- I then flattened off the majority of the epoxy using a router flattening jig and the Amana Tool. RC-2255 3 wing insert carbide flattening bit. I used TotalBoat High Performance 2:1 epoxy, also available on our website, and @mixolusa #25 White tint with some blue and white pigments for the X as well. I absolutely love the look of this!

Carving logo with a giant V-Bit and painting it on some 1/2" plywood using the Amana Tool  RC-1111 140° Insert carbide ‘V’-Groove router bit featuring 3-5/64" diameter, 1/2" cut height and 1/2” shank and Stepcraft Q.408 CNC machine all available on our website. **What do you think of how it turned out? RPM: 18,000 Feed Rate: 60ipm Plunge Rate: 30ipm

What would you make with a machine like this? Unloading, setting up and using the CAMaster Panther PT-408 4'x8' CNC machine for the first time! All tools used in the video are available from @toolstoday and are listed below! This machine is extremely well built and robust in every way a true production machine, we will definitely have tons more content on the machine soon! What all would you like to see done on it? - - - - - - CAMaster Panther PT-408 CNC machine SST Megaflow Air Filtration, item no. SST003 Black Box Hurricane Vacuum, item no. BBV-HVP-2 Amana Tool 3 Wing Insert Carbide Surfacing Bit, item no. RC-2255 Amana Tool 1/2" Downcut bit, item no. 46206-K Amana Tool 1/2" Compression bit, item no. 46199-K

Cutting, installing and flush trimming some contrasting splines on the Thankful tray project. I love the contrasting splines, do you prefer contrasting splines or splines that match the wood color? The tools used in this video are available from @toolstoday, be sure to check them out on our website! --- SawStop 1.75hp PCS Table Saw, item no. PCS175-TGP252 Amana Tool 20T Flat Top Grind Blade, item no. RB1020C Plans for the Thankful Tray Project, item no. THANKFUL_TRAY Rikon 14" Deluxe Bandsaw 1.75hp, item no. 10-326 Amana Tool 3/4" 4 Flute Flush Trim Bit, item no. 57187 JessEm Ultimate Excel II Router Table, item no. 09414 Festool ETS 150/3 Sander, item no. FS-576079

What do you think of this workholding wasteboard? Making the workholding wasteboard on the Stepcraft M.1000 CNC machine. Be sure to check out the plans to make your own as well, item M_1000_BOARD, all available on the @toolstoday website!

Assembling the shop utility cart project using box joints and screws to hold everything together. If you're interested in making this for yourself, plans for the project are available on our website, item no. SHOPCART. All tools used in this video are also available from @toolstoday, be sure to check them out on our website! -- Festool CXS 18 Drill, item no. FS-576887 Festool CXS 12 Drill, item no. FS-576869 Amana Tool Adjustable No-Mar Carbide Tipped Countersink bit for Festool CENTROTEC System, item no. 55162 Amana Tool Adjustable No-Mar Carbide Tipped Countersink bit Hex Shank, item no. 55227 MicroJig MatchFit Dovetail Clamps, item no. DVC-538K2 Festool Hand Driver, item no. FS-200140

What do you think of how this turned out? I could not be happier with how this project turned out! Making a wood perpetual calendar on the Stepcraft M.1000 CNC machine using the Amana Tool 45644-K 60 degree Spektra coated v-bit, 46202-K 1/4" downcut bit, 46200-K 1/8" downcut bit, 46315-K 1/4" Spektra™ coated upcut bit and plans for this project, item no. CALENDAR, all available from @toolstoday

What do you think of how this shop utility cart project turned out? If you're interested in making this for yourself, plans for the project are available on our website, item no. SHOPCART. All tools used in this video are also available from @toolstoday, be sure to check them out on our website! -- Stepcraft M.1400 CNC machine, item no. stepcraft_M1400 Amana Tool 1/8" Carbide Drill bit, item no. SCFD-100 Amana Tool 90 Degree Insert Carbide V-Bit, item no. RC-45711 Amana Tool 1/4" compression bit, item no. 46170-K Black Box Storm Vacuum, item no. BBV-SVP-2 Festool CXS 18 Drill, item no. FS-576887 Festool CXS 12 Drill, item no. FS-576869 Amana Tool Adjustable No-Mar Carbide Tipped Countersink bit for Festool CENTROTEC System, item no. 55162 Amana Tool Adjustable No-Mar Carbide Tipped Countersink bit Hex Shank, item no. 55227